ATC codes John Deere Error - The Latest John Deere News and Trends

ATC codes

John Deere ATC Fault Codes / ATC Error Codes

Understanding ATC Fault Codes

John Deere uses ATC fault codes to quickly identify and address issues within the Automatic Temperature Control (ATC) systems. These systems play a crucial role in maintaining optimal climate control in vehicle cabins, essential for operator comfort and efficiency. When a system triggers an ATC fault code, it alerts to specific climate control issues that need immediate attention to prevent system failure and maintain operational excellence.

Navigating the Fault Code System

Each ATC fault code directly pinpoints a specific issue, ranging from sensor malfunctions to communication errors within the system. Operators and service technicians can use these codes to diagnose and solve problems efficiently. This improves maintenance procedures and system reliability. This guide delves into various John Deere ATC fault codes, explaining their causes, how the equipment reacts, and steps for effective troubleshooting.

Effective Troubleshooting

Our comprehensive list of ATC error codes provides identifications, implications, and detailed descriptions along with actionable recommendations for each issue. By understanding these codes, operators and technicians can anticipate potential failures and take proactive measures to ensure the equipment runs smoothly with minimal downtime.

Utilizing This Guide

Designed for both experienced technicians and new operators, this guide helps accurately diagnose and effectively troubleshoot issues related to the Automatic Temperature Control system. We have crafted each entry to be clear and informative, offering insights into system behaviors and detailed advice on resolving issues.

ATC 600006.13 – Diagnostic Trouble Code Not Known. John Deere System Advisory.

John Deere ATC codes

The error code, ATC 600006.13, is triggered by the CommandCenter (DTI) when it receives a diagnostic trouble code (DTC) via the CAN BUS that is not stored in the DTI memory. This general diagnostic trouble code is used by the…
READ MORE
ATC 524219.04 – B143 Defog Sensor, Voltage Too Low. John Deere System Advisory.

John Deere ATC codes

The error code, ATC 524219.04, is triggered when the control unit detects that the voltage at the signal input for the defog sensor (B143, lead 2003) is too low, suggesting that the circuit is shorted to ground. This low voltage…
READ MORE
ATC 524219.03 – B143 Defog Sensor, Voltage Too High. John Deere System Advisory.

John Deere ATC codes

The error code, ATC 524219.03, is triggered when the control unit detects that the voltage at the signal input for the defog sensor (B143, lead 2003) is too high, indicating that the circuit may be shorted to a supply lead…
READ MORE
ATC 524219.02 – B143 Defog Sensor, Frequency Out of Valid Range. John Deere System Advisory.

John Deere ATC codes

The error code, ATC 524219.02, is triggered when the control unit detects that the frequency from the defog sensor (B143, lead 2003) is outside the valid frequency range (32.26 – 37.88 Hz). Deviations from the specified frequency range can indicate…
READ MORE
ATC 524203.04 – B125 Sensor for Ambient Air Temperature (Front), Voltage Too Low. John Deere System Advisory.

John Deere ATC codes

The error code, ATC 524203.04, is triggered when the control unit measures 0 volts at the signal input for the front ambient air temperature sensor (B125, lead 2001). This absence of voltage typically indicates a short to ground in the…
READ MORE
ATC 524203.03 – B125 Sensor for Ambient Air Temperature (at Front), Voltage Too High. John Deere System Advisory.

John Deere ATC codes

The error code, ATC 524203.03, is triggered when the control unit measures a voltage exceeding 5 volts at the signal input for the front ambient air temperature sensor (B125, lead 2001). This high voltage typically indicates that the circuit is…
READ MORE
ATC 524202.04 – B126 Sensor for Ambient Air Temperature (at Rear), Voltage Too Low. John Deere System Advisory.

John Deere ATC codes

The error code, ATC 524202.04, is triggered when the control unit measures 0 volts at the signal input for the rear ambient air temperature sensor (B126, lead 2006). This absence of voltage typically indicates a short to ground in the…
READ MORE
ATC 524202.03 – B126 Sensor for Ambient Air Temperature (at Rear), Voltage Too High. John Deere System Advisory.

John Deere ATC codes

The error code, ATC 524202.03, is triggered when the control unit detects a voltage exceeding 5 volts at the signal input for the rear ambient air temperature sensor (B126, lead 2006). This high voltage typically indicates that the circuit is…
READ MORE
ATC 523979.07 – S139 Switch for Heated Rear Window, Fault. John Deere System Advisory.

John Deere ATC codes

The error code, ATC 523979.07, is triggered when the control unit receives the engagement signal from the heated rear window switch (S139, lead 2013) for an extended period of time. This condition usually suggests that the switch is either jammed…
READ MORE
ATC 523848.13 – Adjusting Motor for Air Distribution Not Calibrated. John Deere System Advisory.

John Deere ATC codes

The error code, ATC 523848.13, is triggered when the air distribution adjusting motor (B132) is found to have an invalid calibration or is not yet calibrated. This lack of proper calibration can lead to incorrect air flow distribution within the…
READ MORE
ATC 523979.05 – S139 Switch for Heated Rear Window, Current Too Low. John Deere System Advisory.

John Deere ATC codes

The error code, ATC 523979.05, is triggered when the control unit detects too low an amperage at the signal input of the indicator light in the heated rear window switch (S139, lead 2021). This condition often indicates an interruption in…
READ MORE

The Latest John Deere News and Trends

ATC codes

John Deere ATC Fault Codes / ATC Error Codes

Understanding ATC Fault Codes

Navigating the Fault Code System

Effective Troubleshooting

Utilizing This Guide

ATC 600006.13 – Diagnostic Trouble Code Not Known. John Deere System Advisory.

ATC 524219.04 – B143 Defog Sensor, Voltage Too Low. John Deere System Advisory.

ATC 524219.03 – B143 Defog Sensor, Voltage Too High. John Deere System Advisory.

ATC 524219.02 – B143 Defog Sensor, Frequency Out of Valid Range. John Deere System Advisory.

ATC 524203.04 – B125 Sensor for Ambient Air Temperature (Front), Voltage Too Low. John Deere System Advisory.

ATC 524203.03 – B125 Sensor for Ambient Air Temperature (at Front), Voltage Too High. John Deere System Advisory.

ATC 524202.04 – B126 Sensor for Ambient Air Temperature (at Rear), Voltage Too Low. John Deere System Advisory.

ATC 524202.03 – B126 Sensor for Ambient Air Temperature (at Rear), Voltage Too High. John Deere System Advisory.

ATC 523979.07 – S139 Switch for Heated Rear Window, Fault. John Deere System Advisory.

ATC 523848.13 – Adjusting Motor for Air Distribution Not Calibrated. John Deere System Advisory.

ATC 523979.05 – S139 Switch for Heated Rear Window, Current Too Low. John Deere System Advisory.

Categories

Recent Posts

John Deere fault codes: