ECU 000676.05 – Glow Plug Relay Voltage Too Low (Relay for Electric Starting Aid, Current Too Low). John Deere System Advisory.
ECU 000676.05 (ECU 676.05)
Code: 000676.05
Shortcode: 676.05
Description:
This error code, ECU 000676.05, is set when the ECU detects no output signal from the glow plug relay despite energizing the relay supply lead. This condition indicates a circuit problem, such as an open circuit at the glow plug relay or a defective relay (K02/01). The ECU uses manifold air temperature to determine the duration of power supply to the glow plugs.
Reaction:
The ECU may limit or disable the starting aid function, resulting in difficulty starting the engine, especially in cold weather.
Recommendations:
- Inspect Relay and Wiring: Check the glow plug relay and its wiring for signs of damage, disconnections, or corrosion that could cause an open circuit.
- Measure Circuit Continuity: Use a multimeter to measure continuity in the relay circuit to identify any breaks or high resistance points.
- Test Relay Functionality: Verify that the relay activates when the ECU sends the signal. If the relay does not respond, it may be defective.
- Replace Faulty Components: Replace any damaged wiring or a faulty relay to restore the correct circuit operation.
- Reset ECU and Conduct System Tests: After repairs, reset the ECU and test the starting aid system to ensure the relay functions correctly and the error code is cleared.
Note:
Ensuring the glow plug relay operates correctly is essential for reliable engine starting. Regular maintenance and timely diagnostics can help prevent starting issues, particularly in cold conditions.