HV1 000158.03 – HV I Switched Supply Voltage High
HV1 000158.03 (HV1 158.03)
Code: 000158.03
Shortcode: 158.03
Description:
This error code, HV1 000158.03, is triggered when the switched supply voltage to the Hitch Control Unit (HV I) exceeds 16.0 V. This condition indicates an overvoltage situation which can potentially damage the HV I or affect its operation.
Reaction:
None.
Recommendations:
- Inspect Power Supply:
- Check the power supply lines to the Hitch Control Unit for any signs of overvoltage conditions.
- Examine Vehicle Load Center (VLC):
- Since the VLC control unit wake-up circuit is the voltage source, perform diagnostics on the VLC. Verify if any faults or irregularities are present in the VLC.
- Check for Associated Codes:
- Look for other 000158.XX codes in other control units that may indicate similar issues. Address any related codes found.
Note:
Proper voltage regulation is essential to prevent overvoltage conditions. Regular checks on the electrical system and maintaining a stable power supply can help avoid such issues.
