Description:

This error code indicates a mismatch between the output signals of the clutch pedal potentiometer. The voltage at channel 1 must be double the voltage of channel 2.

Reaction:

The control software may function in a limited capacity or not at all, affecting the operation of the clutch pedal sensor unit.

Recommendations:

Inspect Clutch Pedal Potentiometer:

• Check the clutch pedal potentiometer for signs of damage or defect. Replace the potentiometer if necessary.

Test Voltage Outputs:

• Use a multimeter to measure the voltage outputs at channels 1 and 2 of the clutch pedal potentiometer. Ensure that channel 1 voltage is double that of channel 2.

Check Wiring and Connections:

• Inspect the wiring and connections for the clutch pedal potentiometer for any signs of damage, loose connections, or corrosion. Repair or replace any faulty components.

Update Control Software:

• Ensure that the control software is updated to the latest version. Firmware updates might improve handling of potentiometer signals.

Consult Manufacturer Support:

• If the issue persists, consult technical support or the manufacturer for further diagnostics and assistance.

Monitor System Performance:

• After addressing the issue, monitor the system to ensure the clutch pedal potentiometer functions correctly and the error does not recur.

Note:

Maintaining proper signal output ratios and ensuring good connections are essential for the reliable operation of the clutch pedal potentiometer.