This diagnostic trouble code is generated when the Engine Control Unit (ECU) detects ongoing communication issues with the Body Control Unit (BCU). These problems can affect a wide range of vehicle functions controlled by the BCU, such as lighting, climate control, and vehicle security systems.
-
John Deere error ECU codes
-
John Deere error ECU codes
This diagnostic trouble code indicates a data transfer problem between the Automatic Transmission Control (ATC) or Engine Timing Control (ETC) software and the ECU, characterized by intermittent or non-existent reception of CAN messages, likely due to an open circuit, short circuit, or faulty CAN Bus terminating resistors.
-
John Deere error ECU codes
Error code ECU 002006.19 is triggered when there is a discrepancy between the Vehicle Identification Number (VIN) recorded in the Engine Interface Control (EIC) software and that stored in the Engine Control Unit (ECU) software, specifically in vehicles equipped with an immobilizer system. This mismatch can trigger security protocols that limit vehicle functionality to prevent…
-
John Deere error ECU codes
This error code, ECU 002006.14, indicates a mismatch between the Vehicle Identification Number (VIN) recorded in the Engine Interface Control (EIC) software and that stored in the Engine Control Unit (ECU) software. This issue is specific to vehicles equipped with an immobilizer system, which uses VIN matching as a security measure to authenticate the components…
-
John Deere error ECU codes
Error code ECU 002006.13 is triggered when there is a discrepancy between the Vehicle Identification Number (VIN) stored in the Engine Interface Control (EIC) software and the Engine Control Unit (ECU) software. This issue is particularly critical for vehicles equipped with an immobilizer, as it affects the authentication process necessary for normal vehicle operation.
-
John Deere error ECU codes
Error code ECU 002006.09 is triggered when there is a data transfer problem between the Engine Interface Control (EIC) software and the Engine Control Unit (ECU) software. Issues such as intermittent or nonexistent reception of CAN Bus messages indicate potential problems like an open circuit in the CAN Bus, a short circuit, or faulty CAN…
-
John Deere error ECU codes
Error code ECU 001761.18 is triggered when the DEF tank fluid level falls below 0 percent, indicating that the tank is effectively empty. This critical condition can severely impact the vehicle’s emissions control system and could lead to engine derate or shutdown to comply with emissions regulations.