Description:

This diagnostic trouble code is generated when the control software detects that the voltage at the lead of the clutch pedal potentiometer is too low. This typically indicates an open circuit in the potentiometer circuit.

Reaction:

The control software may limit or disable the functionality of the transmission.

Recommendations:

Inspect Potentiometer Circuit:

• Check for open circuits in the wiring and connections of the clutch pedal potentiometer. Repair any broken or disconnected wires.

Test Clutch Pedal Potentiometer:

• Test the potentiometer for proper operation. Replace the potentiometer if it is faulty.

Verify Voltage Levels:

• Use a multimeter to verify the voltage levels at the potentiometer lead. Ensure they are within the specified range.

Check for Loose Connections:

• Ensure all connections are secure and properly seated. Tighten any loose connections.

Note:

Addressing low voltage issues promptly is essential to maintain transmission functionality and ensure accurate clutch operation.