Description:

This error code is generated if the control software detects that the current value at the Park Lock Solenoid 2 is too low. This may indicate an open circuit.

Reaction:

The equipment may fail to engage or disengage the park lock properly, leading to potential operational issues.

Recommendations:

• Inspect Solenoid Wiring:
  • Check the wiring to the Park Lock Solenoid for any signs of damage, corrosion, or loose connections. Repair or replace as necessary.
• Test Solenoid:
  • Verify the operation of the Park Lock Solenoid itself. Replace if it is found to be defective.
• Check Power Supply:
  • Ensure that the solenoid is receiving the correct voltage. Check for any blown fuses or circuit breakers.
• Verify Connections:
  • Ensure all electrical connectors are securely attached and free from debris or corrosion.
• Consult Technical Documentation:
  • Refer to the technical manuals for specific troubleshooting steps related to the Park Lock Solenoid system.

Note:

An open circuit could be due to damaged wiring, faulty connections, or a malfunctioning solenoid. Regular maintenance and inspection can help prevent such issues.