PLC 328101.31 – B90 Park Lock Pressure Sensor, Supply Voltage Too Low
PLC 328101.31 (PLC )
Code: 328101.31
Shortcode:
Description:
This diagnostic trouble code is generated when the PLC control unit detects a voltage of less than 4.8 volts at the positive power supply lead for the park lock pressure sensor (B90). This indicates a short to ground in the circuit.
Reaction:
The park lock pressure sensor may not function correctly, potentially affecting the vehicle’s ability to maintain the park lock.
Recommendations:
- Inspect Wiring and Connections:
- Check for any signs of damage, corrosion, or loose connections in the wiring to the B90 park lock pressure sensor. Repair or replace as necessary.
- Check for Shorts to Ground:
- Inspect the circuit for any shorts to ground and rectify any issues found.
- Test the Sensor:
- Verify the functionality of the B90 park lock pressure sensor. Replace if faulty.
- Secure Connections:
- Ensure all connections are secure and free from contamination.
Note:
Regular inspections and maintenance can prevent issues with low voltage in sensor circuits, ensuring the reliable operation of safety-critical systems like the park lock mechanism.