Description:

This error code is generated when a data transfer problem occurs between the OIC control software and the PTF control software. The reception of one or more CAN messages transmitted by the OIC control software is intermittent or non-existent, which may be due to issues such as a loose wire. This indicates a problem in the CAN bus.

Reaction:

When this code is detected, the control software may exhibit limited or no functionality.

Recommendations:

• Inspect CAN Bus Connections:
  • Check all CAN bus connections for secure and correct installation.
  • Look for any damaged or corroded connectors and replace if necessary.
• Verify Wiring Integrity:
  • Ensure all wires in the CAN bus network are intact and free of damage.
  • Repair or replace any loose or damaged wires.
• Check OIC Software:
  • Ensure that the OIC control software is up to date.
  • Update the software if necessary.
• Diagnose CAN Bus Traffic:
  • Use diagnostic tools to analyze CAN bus traffic and identify any abnormalities or faults.

Note:

Maintaining a reliable CAN bus communication is essential for the proper operation of the control software. Regular inspections and maintenance can help avoid data transfer issues.