Description:

This diagnostic trouble code is generated when the PTF control software detects that the voltage in the positive lead of the front PTO solenoid valve is too low. This indicates a short circuit to ground.

Reaction:

When this code is detected, the front PTO may exhibit limited or no functionality.

Recommendations:

• Inspect Solenoid Valve Circuit:
  • Check for a short circuit to ground in the wiring to the front PTO solenoid valve.
  • Repair or replace any damaged or disconnected wires.
• Test the Solenoid Valve:
  • Verify the functionality of the front PTO solenoid valve using diagnostic tools.
  • Replace the solenoid valve if it is found to be faulty.
• Check Connectors:
  • Ensure that all connectors are properly seated and free of corrosion.
  • Clean or replace connectors as needed.

Note:

Regular inspection and maintenance of the front PTO solenoid valve and its circuit can prevent voltage issues and ensure reliable operation.