Description:

This diagnostic trouble code is generated when the PTF control software detects that the current in the ground lead of the front PTO solenoid valve is too low. This indicates that the circuit is open.

Reaction:

When this code is detected, the front PTO may exhibit limited or no functionality.

Recommendations:

• Inspect Solenoid Valve Circuit:
  • Check for an open circuit in the wiring to the front PTO solenoid valve.
  • Repair or replace any damaged or disconnected wires.
• Test the Solenoid Valve:
  • Verify the functionality of the front PTO solenoid valve using diagnostic tools.
  • Replace the solenoid valve if it is found to be faulty.
• Check Connectors:
  • Ensure that all connectors are properly seated and free of corrosion.
  • Clean or replace connectors as needed.

Note:

Regular inspection and maintenance of the front PTO solenoid valve and its circuit can prevent current issues and ensure reliable operation.