PTP 000123.04 – Clutch Pressure Sensor/Switch Circuit Voltage Low
PTP 000123.04 (PTP 123.04)
Code: 000123.04
Shortcode: 123.04
Description:
This error code is stored when the voltage from the clutch pressure sensor to the PTP control unit drops below 0.1 V. This indicates a potential open circuit or a faulty sensor.
Reaction:
The control unit limits the functionality to protect the system from potential damage due to low voltage readings.
Recommendations:
- Inspect Sensor Wiring:
Check for any disconnected, broken, or corroded wires and connectors between the clutch pressure sensor and the PTP control unit. - Test Sensor Voltage:
Measure the voltage at the clutch pressure sensor to ensure it is within the specified range. Replace the sensor if necessary. - Verify Ground Connection:
Ensure that the ground connection for the sensor circuit is secure and free from corrosion. - Consult Technical Support:
If the issue persists, consult technical support or the manufacturer for further assistance.
Note:
Low voltage issues can result in incorrect sensor readings and affect clutch operation, so addressing this error promptly is important.