Description:

This error code is triggered when the PTP control unit detects that the transmission is not calibrated. This can occur if the PTP is currently performing calibration, has never been calibrated, or if a failed calibration was saved.

Reaction:

The system is recoverable upon power-up.

Recommendations:

• Complete Calibration:
  Allow the calibration process to complete without interruption. Ensure that the vehicle remains stationary and the environment is suitable for calibration.
• Recalibrate Transmission:
  If the calibration has failed or has never been performed, follow the manufacturer’s procedures to recalibrate the transmission.
• Inspect Calibration Data:
  Ensure that the calibration data is saved correctly. If data corruption is suspected, reinitialize the calibration process.
• Consult Technical Support:
  If calibration issues persist, consult technical support or the manufacturer for further assistance.

Note:

Proper calibration is crucial for transmission performance. Regularly verify calibration status and perform recalibrations as needed.