Description:

This diagnostic trouble code is generated if the control software registers that the current at the output to the right outer worklight on the front of the roof, right turn-signal light on the front of the roof (SAE), or right extra-wide vehicle turn-signal light (SAE) is too high. This indicates a short circuit to ground.

Reaction:

When this error is detected, the control software may experience limited or no functionality of the worklight or the turn-signal light.

Recommendations:

• Inspect Light Circuit:
  • Check the wiring and connectors associated with the right outer worklight, right turn-signal light, or right extra-wide vehicle turn-signal light for signs of short circuits to ground. Look for damaged insulation or exposed wires. Repair or replace any compromised wiring.
• Test Lights:
  • Test the right outer worklight, right turn-signal light, or right extra-wide vehicle turn-signal light to ensure they are not damaged or causing excessive current draw. Replace any faulty light components.
• Verify Power Supply:
  • Ensure the power supply to the lights is stable and within the specified range. Inspect for any issues that could cause an overcurrent condition.

Note:

Excessive current can damage the lights and associated circuitry. Regular inspection and maintenance of the electrical system are essential to prevent such issues.