Description:

This error code indicates a failure in the Single Lever Control Auxiliary Switches (Thumb Switches). These switches are critical for auxiliary control functions.

Reaction:

When this code is detected, the SCC will disable the functions related to the Single Lever Control Auxiliary Switches, turning them off to prevent further issues.

Recommendations:

Inspect Auxiliary Switches:

• Verify the functionality of the Single Lever Control Auxiliary Switches (Thumb Switches). Replace the switches if they are found to be faulty.

Check Wiring and Connectors:

• Inspect all wiring and connectors associated with the auxiliary switches for signs of damage, poor connections, or corrosion. Repair or replace as necessary.

Test Switch Functionality:

• Perform functional tests to ensure the auxiliary switches are operating correctly and sending accurate signals to the SCC.

Monitor Switch Signals:

• Use diagnostic tools to monitor signals from the auxiliary switches to the SCC, ensuring they are being received correctly.

Update Firmware and Software:

• Ensure all relevant components, including the SCC, have the latest firmware and software updates.

Consult Technical Support:

• If the issue persists, contact technical support for further diagnostics and assistance.

Note:

Proper functioning of auxiliary switches is essential for the efficient operation of auxiliary control functions. Regular maintenance and testing can help prevent faults.