Description:

This error code indicates that the Single Lever Control fore/aft data has been received via CAN message with a failure indication. This could be due to sensor malfunction, communication issues, or data corruption.

Reaction:

When this code is detected, the SCC will disable the functions related to the Single Lever Control fore/aft sensor, turning them off to prevent further issues.

Recommendations:

Inspect Fore-Aft Sensor:

• Verify the functionality of the Single Lever Control fore/aft sensor. Replace the sensor if it is found to be faulty.

Check Wiring and Connectors:

• Inspect all wiring and connectors associated with the fore/aft sensor for signs of damage, poor connections, or corrosion. Repair or replace as necessary.

Monitor CAN Messages:

• Use diagnostic tools to monitor CAN messages from the fore/aft sensor to the SCC, ensuring they are being received without faults.

Update Firmware and Software:

• Ensure all relevant components, including the SCC, have the latest firmware and software updates.

Consult Technical Support:

• If the issue persists, contact technical support for further diagnostics and assistance.

Note:

Reliable sensor data is essential for accurate control. Regular maintenance and testing can help prevent sensor faults.