Description:

This error code indicates that the external control message for Selective Control Valve III (SV III) has been missing for longer than 10 seconds. Missing command messages can originate from the Resume Switch, iTEC™, Option Configuration Connector, or Attached Implements.

Reaction:

When this code is detected, the SCC functions will be degraded, impacting overall performance.

Recommendations:

Check External Control Sources:

• Verify the functionality of the Resume Switch, iTEC™, Option Configuration Connector, and any attached implements that may be sending control messages to SV III.

Inspect Wiring and Connectors:

• Check all wiring and connectors associated with SV III for signs of damage, poor connections, or corrosion. Repair or replace as necessary.

Monitor Communication:

• Use diagnostic tools to monitor the communication signals from external control sources to SV III, ensuring they are being received consistently.

Update Firmware and Software:

• Ensure all relevant components, including the SCC, have the latest firmware and software updates.

Consult Technical Support:

• If the issue persists, contact technical support for further diagnostics and assistance.

Note:

Reliable communication from external control sources is essential for the accurate and efficient operation of SV III.