SCC 524104.19 – SCV III Control Lever Fault Message Received

SCC 524104.19 (SCC )

Code: 524104.19

Shortcode:

Description:

This error code indicates that the SCV III (Selective Control Valve III) lever position data has been received via CAN message with a failure indication. This could be due to a faulty lever sensor, communication issues, or data corruption.

Reaction:

When this code is detected, the SCC will disable the functions related to SCV III to prevent further issues.

Recommendations:

Inspect SCV III Control Lever:

  • Verify the functionality of the SCV III control lever sensor. Replace the sensor if it is found to be faulty.

Check Wiring and Connectors:

  • Inspect all wiring and connectors associated with the SCV III control lever for signs of damage, poor connections, or corrosion. Repair or replace as necessary.

Monitor CAN Messages:

  • Use diagnostic tools to monitor CAN messages from the SCV III control lever to the SCC, ensuring they are being received without faults.

Update Firmware and Software:

  • Ensure all relevant components, including the SCC, have the latest firmware and software updates.

Consult Technical Support:

  • If the issue persists, contact technical support for further diagnostics and assistance.

Note:

Accurate lever position data is essential for precise control. Regular maintenance and testing can help prevent lever faults.


Control Units: John Deere

John Deere Parts
John Deere Logo